Academic Publications

Published or accepted to be published in journals covered by SCI, SSCI or AHCI

National

• R. Halıcıoğlu , L.C. Dülger and A.T. Bozdana.
  (2016) StructuStructural design and analysis of a servo crank press’, Engineering Science and Technology.
  Int. J. Of Science And Technology , Vol. 19, No. 4, 2060-2072,

International

• Murat Türkan , Özler Karakaş and Filippo Berto.
  (2024) Low cycle fatigue behavior of AZ31 magnesium alloy joined by friction stir welding.
  Fatigue & Fracture Of Engineering Materials & Structures , Vol. 1, No. 11,

• Yağmur Kabakcı , Sadiye Kosar , Ozgur Dogan , Fehmi Gorkem Uctug and Osman Atilla Arıkan.
  (2024) Context Sensitive Links 1 of 1 Determination of characteristics for mechanically separated organic fraction of MSW at a full-scale anaerobic digestion plant.
  Waste Disposal And Sustainable Energy , Vol. 6, No. 2, 233-241,

• Fehmi Görkem Üçtuğ , Yağmur Kabakcı , Sadiye Koşar , Özgür Doğan and Osman Atilla Arıkan.
  (2024) Effect of direct enzyme addition on the anaerobic digestion of OFMSW.
  Sustainable Chemistry And Pharmacy , Vol. 37,

• E. Gültekin , H.İ Çelik , L.C. Dülger , M. Sünbül.
  (2024) A Machine Vision Solution for Industrial Application of Abrage Inspection and Diameter Measurement on Yarn bobbins.
  Textile And Apparel , Vol. 34, No. 1, 1-10,

• Fehmi Görkem Üçtuğ , Yağmur Kabakcı , Sadiye Koşar , Özgür Doğan and Osman Atilla Arıkan.
  (2024) Enhancement of methane production by electrohydrolysis pretreatment for anaerobic digestion of OFMSW.
  Environmental Research , Vol. 240, No. 1,

• Bahar Moghadasi , Fehmi Gorkem Uctug.
  (2024) Towards sustainable production of sesame products: Comparison of traditional and modern production systems via a life cycle assessment approach.
  Cleaner And Responsible Consumption , Vol. 12,

• Fehmi Görkem Üçtuğ , Yaşar Yetişkin , Niall MacDowell.
  (2023) The role of policy instruments on deployment of carbon capture, storage and utilization technologies: A case study in Türkiye.
  International Journal Of Greenhouse Gas Control , Vol. 130,

• Fehmi Görkem Üçtuğ , Bahar Moghadasi.
  (2023) Life cycle assessment of rose oil and rose water production: a case study in Iran.
  International Journal Of Environmental Science And Technology ,

• Mihaela Asaftei , Massimiliano Lucidi , Cristina Cirtoaje , Alina-Maria Holban , Costas A. Charitidis , Fang Yang , Aiguo Wu , George A. Stanciu , Özge Sağlam , Veronica Lazar , Paolo Visca and Stefan G. Stanciu.
  (2023) Fighting bacterial pathogens with carbon nanotubes: focused review of recent progress.
  RSC Advances , Vol. 13, No. 19682,

• Fehmi Görkem Üçtuğ.
  (2023) Life cycle assessment-based environmental impact analysis of a tier 4 data center: A case study in Turkey.
  Sustainable Energy Technologies And Assessments , Vol. 56, No. 103076,

• M.E. Kütük , L.C. Dulger.
  (2023) Optimization with Genetic Algorithm (GA): Planar mechanism synthesis.
  Scientica Iranica-Transactions B: Mechanical Engineering , Vol. 30, No. 5, 1587-1594,

• Begümnur Küçükcan , Bensu Günay , Fatma Pınar Gördesli-Duatepe , Özge Sağlam.
  (2023) Langmuir-Blodgett Deposition and Physicochemical Surface Characterization of Two-Dimensional Perovskite Nanosheets on ITO-PET Substrates.
  Colloids And Surfaces A: Physicochemical And Engineering Aspects , Vol. 666, No. 131338,

• Bensu Günay , Hilal Döğer , Zeynep Firtina Karagonlar , Özge Sağlam.
  (2022) Ag-intercalation of Tm3+/Er3+ Co-doped layered perovskites and their exfoliated 2D nanosheets with an enhanced antibiofilm and antibacterial activity.
  Materials Today Communications , Vol. 33, No. 104972,

• H.İ Çelik , L.C. Dulger , B. Öztaş , M. Kertmen , E. Gültekin.
  (2022) A Novel Industrial Application of CNN Approach: REal Time Fabric Inspection and Defect Classification on Circular Knitting Machine, .
  Tekstil Ve Konfeksiyon , Vol. 32, No. 4, 345-352,

• Murat Türkan , Özler Karakaş.
  (2022) Numerical modeling of defect formation in friction stir welding.
  Materials Today Communications , Vol. 31, No. 103539,

• Bensu Gunay , Özge Süer , Hilal Döğer , Özlem Arslan , Uğur Ünal , Özge Sağlam.
  (2022) Synthesis of Upconverting Nanosheets Derived from Er-Yb and Tm-Yb Co-Doped Layered Perovskites and their Layer-by-Layer Assembled Films.
  Colloids And Surfaces A: Physicochemical And Engineering Aspects , Vol. 129502, 1-10,

• Yiğit Erçayhan , Nurşen Saklakoğlu.
  (2021) The effect of thermomechanical process on metallurgical and mechanical properties of 38MnVS6 micro alloyed steel.
  Materials Science & Engineering Technology , Vol. 56, No. 6, 644-654,

• Görkem Üçtuğ , Dorukhan Günaydın , Beliz Hünkar , Cansu Öngelen.
  (2021) Carbon footprints of omnivorous, vegetarian, and vegan diets based on traditional Turkish cuisine.
  Sustainable Production And Consumption , Vol. 26, 597-609,

• Bensu Gunay , Ece Sarıyar , Ugur Unal , Zeynep Firtina Karagonlar , Özge Sağlam.
  (2021) Upconversion Properties of Tm3+-Er3+ Co-Doped Layered Perovskites and in-vitro Cytotoxicity of their Exfoliated Nanomaterials.
  Colloids And Surfaces A: Physicochemical And Engineering Aspects , Vol. 126003, No. 612,

• A Noori , H Döğer , Y Demirhan , M Ozdemir , L Ozyuzer , G Aygun , Ö Sağlam.
  (2021) Nanolitography based on electrospun and etched nanofibers.
  Microelectronic Engineering , Vol. 239, No. 111526,

• Fehmi Görkem Üçtuğ , Mine Güngörmüşler , Hazal Gül.
  (2021) Environmental lifecycle assessment of industrially produced pickled and roasted vegetables.
  International Journal Of Environmental Science And Technology ,

• Ö Sağlam.
  (2020) Concentration based MultiColor Upconversion Emission of Lanthanides Co-doped Ruddlesden-Popper Type Layered Perovskites.
  Optical Materials , Vol. 109, No. 110294,

• Kardelen Afrodit Adsal , Fehmi Görkem Üçtuğ , Osman Atilla Arıkan.
  (2020) Environmental life cycle assessment of utilizing stem waste for banana production in greenhouses in Turkey.
  Sustainable Production And Consumption , Vol. 22, 110-125,

• Mine Güngörmüşler , İrem Başınhan , Fehmi Görkem Üçtuğ.
  (2020) Optimum Formulation Determination and Carbon Footprint Analysis Of A Novel Gluten-Free Pasta Recipe Using Buckwheat, Teff And Chickpea Flours.
  Journal Of Food Processing And Preservation ,

• Aylin Kaynak Duman , Gaye Öngen Özgen , Fehmi Görkem Üçtuğ.
  (2020) Environmental life cycle assessment of olive pomace utilization in Turkey.
  Sustainable Production And Consumption , Vol. 22, 126-137,

• Murat Türkan , Özler Karakaş.
  (2019) The Influence of Corrosion on the Mechanical Behavior of AISI 316L Stainless Steel Welds.
  MECHANIKA , Vol. 25, No. 2, 114-118, ISBN: 1392-1207

• M. Erkan Kütük , LCanan. Dülger , MTaylan. Daş.
  (2019) Design of a robot-assisted exoskeleton for passive wrist and forearm rehabilitation.
  Mechanical Sciences , Vol. 10, 107-119,

• Fehmi Görkem Üçtuğ , Ayşe İdil Atluğkoyun , Melodi İnaltekin.
  (2019) Environmental life cycle assessment of yoghurt supply to consumer in Turkey.
  Journal Of Cleaner Production , Vol. 215, 1103-1111,

• Fehmi Görkem Üçtuğ.
  (2019) The Environmental Life Cycle Assessment of Dairy Products.
  Food Engineering Reviews , Vol. 11, No. 2, 104-121,

• P. Deimel , K. Stoiber , L. Jiang , Julian A Llyod , Seung Cheol Oh , S. Fischer , Ö. Sağlam , H. Schlichting , Anthoula C Papageorgiou , Johannes V Barth , J. Allegretti and J. Reichert.
  (2019) Bisphenol A and Diethylstilbestrol on Cu (111): On-Surface Polymerization Initiated by Hydroxy-Directed Ortho C–H Bond Activation.
  The Journal Of Physical Chemistry C , Vol. 123, No. 2, 1354-1295,

• A.J.R Almusawi , L.C Dulger , S. Kapucu.
  (2019) Simulation in Virtual Reality: Robotic training and surgical applications.
  Scientica Iranica B , Vol. 26, No. 6, 3369-3374,

• Fehmi Görkem Üçtuğ , Adisa Azapagic.
  (2018) Environmental impacts of small-scale hybrid energy systems: Coupling solar photovoltaics and lithium-ion batteries.
  Science Of The Total Environment , Vol. 643, 1579-1589,

• Semra Ağralı , Fehmi Görkem Üçtuğ , Burçin Atılgan Türkmen.
  (2018) An optimization model for carbon capture & storage/utilization vs. carbon trading: A case study of fossil-fired power plants in Turkey.
  JOURNAL OF ENVIRONMENTAL MANAGEMENT , Vol. 215, 305-315,

• Fehmi Görkem Üçtuğ , Adisa Azapagic.
  (2018) Life Cycle Environmental Impact Analysis of Domestic Solar Water Heaters in Turkey: Effect of Climatic Region.
  Science Of The Total Environment , Vol. 622-623, 1202-1216,

• A. C. Papageorgiou , J. Li , S. C. Oh , B. Zhang , Y. Guo , J. Reichert , A. B. Marco , D. Cortizo-Lacalle , A. Mateo-Alonso , J. V. Barth.
  (2018) Tuning the ease of formation of on-surface metal-adatom coordination polymers featuring diketones.
  Nanoscale , Vol. 10, No. 9561,

• A.R.J Almusawi , L.C Dulger , S. Kapucu.
  (2018) Online teaching of robotic arm by human-robot interaction: end effector force/torque sensing.
  Journal Of The Brazilian Society Of Mechanical Sciences And Engineering , Vol. 40,

• R. Halıcıoğlu , L.C Dülger , A.T. Bozdana.
  (2018) Improvement of Metal forming Quality by motion design.
  Robotics And Computer Integrated Manufacturing , Vol. 51, 112-120,

• R. Halıcıoğlu , L.C Dülger , A.T Bozdana.
  (2018) Modeling, design, and implementation of a servo press for metal forming application.
  Int. J. Of Advanced Manufacturing Technology , 1-12,

• M. Erkan Kütük , Murat Artan , L.Canan Dülger.
  (2018) Hybrid Seven Bar Press Mechanism: Link Optimization and Kinetostatic Analysis, .
  Technicki Glasnik , Vol. 12, No. 3, 181-187,

• Mehmet Öksüz , M.Burak Önal , R. Halıcıoğlu , L.Canan Dülger.
  (2018) Alternative Controller Design for Rotary Inverted Pendulum.
  Technicki Glasnik , Vol. 10, No. 3, 139-145,

• Fehmi Görkem Üçtuğ , Semra Ağralı.
  (2017) Nonlinear Benefit-Cost Optimization-Based Selection of Insulation Material and Window Type: A Case Study in Turkey.
  Journal Of Renewable And Sustainable Energy , Vol. 9, No. 6,

• Fehmi Görkem Üçtuğ , Jinan Nijem.
  (2017) Effect of Sulfonation on the Proton Conductivity of Polyvinylalcohol-Mordenite Direct Methanol Fuel Cell Membranes.
  Asia-Pasific Journal Of Chemical Engineering , Vol. 12, No. 5, 682-693,

• A.C. Papageorgiou , K. Diller , S. Fischer , F. Allegreti , F. Klappenberger , S.C. Oh , Ö. Sağlam , J. Reichert , A. Wiengarten , K. Seufert , W. Auwärter and J.V. Barth.
  (2016) In Vacuo Porphyrin Metalation on Ag(111) via Chemical Vapor Deposition of Ru3(CO)12: Mechanistic Insights.
  Journal Of Physical Chemistry C , Vol. ASAP,

• Özge Sağlam , Görsel Yetik , Joachim Reichert , Johannes V. Barth , Anthoula C. Papageorgiou.
  (2016) On-surface reaction of tetraphenylporphyrins with Os 3 (CO) 12 precursors and Os clusters: A scanning tunnelling microscopy investigation.
  Surface Science , Vol. 646, 26-30,

• J. Llyod , A. Papageorgiou , S. Fischer , S. C. Oh , Ö. Sağlam , K. Diller , D. A. Duncan , F. Allegretti , F. Klappenberger , M. Stöhr , R. J. Maurer , K. Reuter , J. Reichert and J. V. Barth.
  (2016) Dynamics of Spatially Confined Bisphenol A Trimers in a Unimolecular Network on Ag(111).
  Nano Letters , Vol. 10, No. 1, 1033-1041,

• Li Jiang , A.C. Papageorgiou , S. C. Oh , Ö Sağlam , J. Reichert , D.A. Duncan , Y.-Q. Zhang , F. Klappenberger , Y. Guo , F. Allegreti , S. More , R. Bhosale , A. Mateo-Alonso and J.V. Barth.
  (2016) Synthesis of Pyrene-Fused Pyrazaacenes on Metal Surfaces: Toward One-Dimensional Conjugated Nanostructures.
  ACS Nano , Vol. 10, No. 1, 1033-1041,

• Alissa Wiengarten , Julian A Lloyd , Knud Seufert , Joachim Reichert , Willi Auwärter , Runyuan Han , David A Duncan , F. Aleggretti , S. Fischer , S.C. Oh , Ö. Sağlam , L. Jiang , S. Vijayaraghavan , D. Écija , A. C. Papageorgiou and J.V. Barth.
  (2015) Surface‐Assisted Cyclodehydrogenation; Break the Symmetry, Enhance the Selectivity.
  Chemistry-A European Journal ,

• Sabine Keiber , Tim Paasch-Colberg , Alexander Schwarz , Olga Razskazovskaya , Elena Fedulova , Özge Sağlam , Clemens Jakubeit , Shawn Sederberg , Péter Dombi , Nicholas Karpowicz , Ferenc Krausz.
  (2015) Investigation of Laser-Induced Currents in Large-Band-Gap Dielectrics.
  Ultrafast Phenomena XIX , Vol. 162,

• T. Paasch-Colberg , A. Schiffrin , N. Karpowicz , S. Kruchinin , Ö. Sağlam , Sabine Keiber , Olga Razskazovskaya , Sascha Mühlbrandt , Ali Alnaser , Matthias Kübel , Vadym Apalkov , Daniel Gerster , Joachim Reichert , Tibor Wittmann , J V Barth , M. I. Stockman , V. S. Yakovlev , Reinhard Kienberger and Ferenc Krausz.
  (2014) Solid-state light-phase detector.
  Nature Photonics , Vol. 8, 214-216,

• Fehmi Görkem Üçtuğ , Semra Ağralı , Yıldız Arıkan , Eray Avcıoğlu.
  (2014) Deciding between carbon trading and carbon capture and sequestration: An optimisation-based case study for methanol synthesis from syngas.
  Journal Of Environmental Management , Vol. 132, 1-8,

• Nurşen Saklakoğlu , Simge Gençalp İrizalp , Yiğit Erçayhan , Yücel Birol.
  (2014) Investigation of wear behaviour of thixoformed and conventional gravity cast AlSi8Cu3Fe alloys.
  Industrial Lubrication And Tribology , Vol. 66, No. 1, 46-50,

• Ö. Sağlam.
  (2013) Soft Solution Synthesis and Intense Visible Photoluminescence of Lamellar Zinc Oxide Hybrids.
  Scripta Materialia , Vol. 69, 441-444,

• A. C. Papageorgiou , S. Fischer , S. C. Oh , Ö. Sağlam , Joachim Reichert , Alissa Wiengarten , Knud Seufert , Saranyan Vijayaraghavan , David Ecija , Willi Auwärter , Francesco Allegretti , R. G. Acres , K. C . Prince , Katharina Diller , Florian Klappenberger , J. V. Barth.
  (2013) Self-terminating protocol for an interfacial complexation reaction in vacuo by metal–organic chemical vapor deposition.
  ACS Nano , Vol. 7, 4520-4526,

• Fehmi Görkem Üçtuğ , Ergün Yükseltan.
  (2012) A Linear Programming Approach to Household Energy Conservation: Efficient Allocation of Budget.
  Energy And Buildings , Vol. 49, 200-208,

• Fehmi Görkem Üçtuğ , Stuart Holmes.
  (2011) Characterization and Fuel Cell Performance of Polyvinlyalcohol-Mordenite Mixed-Matrix Membranes for Direct Methanol Fuel Cell Use.
  Electrochimica Acta , Vol. 56, 8446-8456,

• O. Saglam , Y. Matsuda , S. Ida , Y. Matsumoto.
  (2010) Syntheses of zinc oxide and zinc hydroxide single nanosheets.
  Chemistry Of Materials , Vol. 22, 3158-3164,

• O. Saglam , U. Unal , S. Ida , M. Goto , Y. Matsumoto.
  (2008) Characterization of self-assembled films of NiGa layered double hydroxide nanosheets and their electrochemical properties.
  Journal Of Solid State Chemistry , Vol. 181, 3257-3263,

• S. Ida , C. Ogata , T. Inoue , K. Izawa , U. Unal , O. Saglam , Y Matsumoto.
  (2007) Preparation of blue luminescent nanosheets derived from layered perovskite Bi2SrTa2O9.
  Journal Of The American Chemical Society , Vol. 129, 8956-8957,

• S. Ida , C. Ogata , U. Unal , K. Izawa , T. Inoue , O. Saglam , Y. Matsumoto.
  (2007) Photoluminescence property of titanate layered oxide intercalated with Tb3+ ions by electrostatic self- assembly deposition method.
  Chemistry Letters , Vol. 36, 158-159,

• S. Ida , U. Unal , K. Izawa , O. Saglam , C. Ogata , T. Inoue , Y. Matsumoto.
  (2006) Photoluminescence spectral change in layered titanate oxide intercalated with hydrated Eu3+.
  Journal Of Physical Chemistry B , No. 110, 23881-23887,

• S. Ida , K. Araki , U. Unal , K. Izawa , O. Saglam , C. Ogata , Y. Matsumoto.
  (2006) Photoluminescence properties of multilayer oxide films intercalated with rare earth ions by the layer-by-layer technique.
  Chemical Communications , Vol. 34, 3619-3621,

• U. Ugur , S. Ida , K. Shimogawa , O. Saglam , K. Izawa , C. Ogata , T. Inoue , Y. Matsumoto.
  (2006) Electrochemical behavior of Ag+ intercalated layered oxides.
  Journal Of Electroanalytical Chemistry , Vol. 595, 95-102,

• K. Izawa , T. Yamada , U. Unal , S. Ida , O. Saglam , M. Koinuma , Y. Matsumoto.
  (2006) Photoelectrochemical oxidation of methanol on oxide nanosheets.
  Journal Of Physical Chemistry B , Vol. 110, 4645-4650,

Published or accepted to be published in journals covered by other indexes

National

• Simge İrizalp , Handenur Karaoğlu , Yiğit Erçayhan , Selda Akgün.
  (2024) AA7475-T7351 ve AA2219-T851 Alaşımlarının Frezelenmesinde Kesici Takım Kaplamalarının ve Kesme Parametrelerinin Yüzey Pürüzlülüğü Üzerine Etkisinin Deneysel Olarak İncelenmesi.
  Fırat Üniversitesi Mühendislik Bilimleri Dergisi , Vol. 36, No. 1, 85-95,

• Özge Sağlam.
  (2020) Daldırmalı Kaplama Sistemi ile 2B Malzemelerin Kaplanması.
  Mühendislik Ve Tasarım Dergisi , Vol. 8, No. 1, 20-32,

• Fehmi Görkem Üçtuğ.
  (2017) Comparison of Life Cycle Environmental Impacts of Electricity Generation in Turkey with Selected European Countries.
  Anadolu Üniversitesi Bilim Ve Teknoloji Dergisi: A-Uygulamalı Bilimler Ve Mühendislik , Vol. 18, No. 1, 178-198,

• Yiğit Erçayhan , Nurşen Saklakoğlu.
  (2013) Dövme prosesinin 41Cr4 ıslah çeliği ve 38MnVS6 mikroalaşımlı çeliği üzerine olan etkilerinin metalurjik ve mekanik açıdan incelenmesi.
  MCBÜ Soma MYO Teknik Bilimler Dergisi , Vol. 1, No. 18, 10-19,

• Yiğit Erçayhan , Nurşen Saklakoğlu.
  (2011) AZ91 magnezyum alaşımının metalografik ve mekanik özelliklerine indiyum elementinin etkisi.
  MCBÜ Soma MYO Teknik Bilimler Dergisi , Vol. 1, No. 15, 11-23,

International

• Murat Türkan , Özler Karakaş.
  (2021) Two different finite element models investigation of the plunge stage in joining AZ31B magnesium alloy with friction stir welding .
  SN Applied Sciences , Vol. 3, No. 165,

• Fehmi Görkem Üçtuğ , Semra Ağralı.
  (2017) Nonlinear Optimization-Based Selection of Insulation Material and Window Type: Effect of Heating and Cooling Base Temperatures.
  Journal Of Green Building , Vol. 12, No. 2, 79-94,

• Murat Türkan , Özler Karakaş.
  (2017) Corrosion and mechanical behavior of TIG-welded AISI 304L stainless steel.
  International Journal Of The Balkan Tribological Association , Vol. 23, No. 4, 653-663,

• Fehmi Görkem Üçtuğ , Vedat Can Baltalı.
  (2017) Feasibility Analysis of Photovoltaic/Battery Energy Storage Hybrid System: An Hourly Estimation Based Approach and a Real Life Case Study.
  Journal Of Green Building , Vol. 12, No. 3, 54-68,

• Nurşen Saklakoğlu , Yiğit Erçayhan.
  (2017) The effect of accelerated air cooling on microstructures and mechanical properties of microalloyed steel.
  International Journal Of Natural And Engineering Sciences , Vol. 11, No. 2, 5-9,

• Fehmi Görkem Üçtuğ , Naz Eylül Kabakci , Betül Akyürek , Olcay Buğu Bekdikhan.
  (2015) Multi-Criteria Decision Making Based Comparison of Power Source Technologies for Utilization in Automobiles.
  Journal Of Clean Energy Technologies , Vol. 3, No. 3, 212-219,

• Latif Tibet Aktaş , Levent Aydın.
  () Stochastic optimization and modeling of high-velocity impact tests on high-temperature carbon–carbon composites.
  SN Applied Sciences ,